[1.10.2-1.11.2][Sponge]◎高版本◎MOD服务端来袭★配备完整插件『内置教程』

本帖最后由酷车手BB弹于 2017-9-5 17:28 编辑

本端已重制

http://www.mcbbs.net/thread-727132-1-1.html

前言

此整合包不适合纯新手

需要熟悉Bukkit端再来用Sponge端

本帖内容未经同意严禁转载！

介绍

各位是否梦想着能开个1.10.2MOD服？

各位是否玩腻了1.7.10的MOD服？

想玩新版特性却因服务端而限制在了1.7.10？

想用sponge但是都没汉化而且不会用？

若被我说中了，这个贴值得你一看！

此服务端均已将所有开服必备的插件装好并配置好
汉化程度为80%

Sponge端是什么？有何特点？

Sponge端是通过官服装上Forge后再装Sponge核心制成

由于Sponge核心是允许以MOD形式存在

因此该服务端的两个核心均可随意更新！

Forge关系到MOD，Sponge关系到插件

若还装了Pore核心，则关系到Bukkit插件（本端没整合）

由于Sponge插件是运行在Forge上，因此以后或许能让插件与MOD完美互通

Forge更新方法：

Sponge更新方法：

现在Sponge插件多吗？

基本的使用方法：

插件列表&控制台输出

手把手教你从何开始

前面也说了，想要开Sponge服需要先熟悉Bukkit！

虽然我标题写的是已配置完

但这仅仅只是权限&玩家功能的配置，服务器的配置还需要靠你自己

先了解Sponge的设置文件

Sponge的设置文件在config/sponge文件夹里

里面你会看到global.conf以及world文件夹

global.conf为全局配置，而文件夹的则是各个世界单独配置

打开global.conf，你看到的就是sponge端的设置中心了

若英文看不懂可对照着下面我添加了注释的文档来配置

看不懂的都不要去动（你看不懂的我也看不懂= =）

# 1.0
#
# # If you need help with the configuration or have any questions related to Sponge,
# # join us at the IRC or drop by our forums and leave a post.
#
# # IRC: #sponge @ irc.esper.net ( http://webchat.esper.net/?channel=sponge )
# # Forums: https://forums.spongepowered.org/
#
# Sponge 的全局配置储存在 global.conf 文件中，游戏会自动在 config/sponge 目录下创建该文件
# 许多配置同时可以通过特定世界或维度中对应的配置文件中的配置来覆盖。
# ----------------------------------------------------------
# 排版：酷车手BB弹（并非翻译者）
# 井号后面若有空格，均为向下阅读。若无空格，均为向上阅读！
# ----------------------------------------------------------
sponge {
block-capturing {
# If enabled, newly discovered blocks will be added to this config with a default value.
auto-populate=false
# Per-mod block id mappings for controlling capturing behavior
mods {
extrautils2 {
# Set to true to perform individual capturing (i.e. skip bulk capturing) for scheduled ticks for a block type
block-tick-capturing {
RedstoneClock=true
}
# Set to false if you want to ignore all specific rules for this mod
enabled=true
}
}
}
block-tracking {
#方块跟踪
# Add block ids you wish to blacklist for player block placement tracking.
# 要禁用的方块ID
block-blacklist=[]
# If enabled, adds player tracking support for block positions. Note: This should only be disabled if you do not care who caused a block to change.
# 如果开启，添加跟踪支持方块位置的玩家
enabled=true
}
bungeecord {
# If enabled, allows BungeeCord to forward IP address, UUID, and Game Profile to this server
# 允许 bungeecord 转发 ip 地址、 UUID 和游戏配置文件到服务器
ip-forwarding=false
}
cause-tracker {
# If true, when a mod changes a world that is different
# 如果启用，当 mod 对世界作出不可意料的改动时，Sponge将会生成报告
# from an expected world during a WorldTick event, the
# cause tracker will identify both the expected changed
# world and the actual changed world. This does not mean
# that the changes are being dropped, simply it means that
# a mod is possibly unknowingly changing a world other
# than what is expected.
report-different-world-changes=false
# If true, the cause tracker will print out when there are too many phases
# 如果启用，那么将在存在特别多的阶段时启用跟踪程序并打印相关信息
# being entered, usually considered as an issue of phase re-entrance and
# indicates an unexpected issue of tracking phases not to complete.
# If this is not reported yet, please report to Sponge. If it has been
# reported, you may disable this.
verbose=false
# If true, the cause tracker will dump extra information about the current phaseswhen certain non-CauseTracker related exceptions occur. This is usually not necessary, as the information in the exception itself can normally be used to determine the cause of the issue
verbose-errors=false
}
commands {
#指令
# A mapping from unqualified command alias to plugin id of the plugin that should handle a certain command
# 当多个插件请求一个特定的命令时，别名将解决冲突，格式如下
#aliases = {
# title=myPlugin
#}
aliases {}
# Patches the specified commands to respect the world of the sender instead of applying the changes on the all worlds.
# 允许维度或世界的特定配置覆盖他们继承的配置
multi-world-patches {
defaultgamemode=true
difficulty=true
gamerule=true
seed=true
setdefaultspawnpoint=true
time=true
toggledownfall=true
weather=true
worldborder=true
}
}
# This setting does nothing in the global config. In dimension/world configs, it allows the config to override config(s) that it inherits from
config-enabled=false
debug {
# Detect and prevent certain attempts to use entities concurrently.
# 检测并防止对实体的同时使用
# WARNING: May drastically decrease server performance. Only enable this to debug a pre-existing issue
concurrent-entity-checks=false
# Dump chunks in the event of a deadlock
# 事件死锁时转储区块数据
dump-chunks-on-deadlock=false
# Dump the heap in the event of a deadlock
# 事件死锁时转储堆事件
dump-heap-on-deadlock=false
# Dump the server thread on deadlock warning
# 事件死锁警告时转储服务器线程
dump-threads-on-warn=false
# Enable Java's thread contention monitoring for thread dumps
# 启用关于 Java 的线程竞争（Thread Contention）的监视器
thread-contention-monitoring=false
}
entity {
#实体
# Number of colliding entities in one spot before logging a warning. Set to 0 to disable
# 在同一个位置发生实体碰撞达到设定的上限值时触发警告。可以将其设为0以禁用。
collision-warn-size=200
# Number of entities in one dimension before logging a warning. Set to 0 to disable
# 在同一个世界维度中出现的实体达到设定的上限值时触发警告。可以将其设为0以禁用。
count-warn-size=0
# Number of ticks before a painting is respawned on clients when their art is changed
# 设定作为实体的画在被更换后的多少个 tick 同步至客户端。
entity-painting-respawn-delay=2
# Number of ticks before the fake player entry of a human is removed from the tab list (range of 0 to 100 ticks).
# 将虚拟玩家从Tab列表中移除的时间. 请输入一个0-100的值.
human-player-list-remove-delay=10
# Controls the time in ticks for when an item despawns.
# 物品消失时间(Tick)
item-despawn-rate=6000
# The upper bounded range where living entities farther from a player will likely despawn
# 保证实体不会消失的距离玩家的最大距离（译者注：参见 Minecraft 的刷怪机制）
living-hard-despawn-range=128
# The amount of seconds before a living entity between the soft and hard despawn ranges from a player to be considered for despawning
# 在消失（译者注：见上一条）和潜在地消失（译者注：见下一条）范围之间的实体尝试消失的时间间隔（译者注：参见 Minecraft 的刷怪机制）
living-soft-despawn-minimum-life=30
# The lower bounded range where living entities near a player may potentially despawn
# 保证实体不会潜在地消失的距离玩家的最大距离（译者注：参见 Minecraft 的刷怪机制）
living-soft-despawn-range=32
# Max size of an entity's bounding box before removing it. Set to 0 to disable
# 在实体存活期间的碰撞箱的最大尺寸。可以将其设为0以禁用。
max-bounding-box-size=1000
# Square of the max speed of an entity before removing it. Set to 0 to disable
# 实体存活期间的最大速度的平方。可以将其设为0以禁用
max-speed=100
}
entity-activation-range {
#实体激活半径
# If enabled, newly discovered entities will be added to this config with a default value.
# 如果启用，新出现的实体将添加到该配置的默认值。
auto-populate=false
# Default activation ranges used for all entities unless overridden.
# 生物的默认激活范围（被特殊指定的生物除外）。
defaults {
ambient=32
#环境实体（Ambient Entity）的默认激活范围。
aquatic=32
#水生实体的默认激活范围。
creature=32
#生物的默认激活范围。
misc=16
#其他实体（Miscellaneous Entity）的默认激活范围。
monster=32
#怪物的默认激活范围。
}
# Per-mod overrides. Refer to the minecraft default mod for example.
# 和具体模组有关，比如表示 Minecraft 游戏本体的默认模组。
mods {}
}
entity-collisions {
#实体碰撞
# If enabled, newly discovered entities/blocks will be added to this config with a default value.
# 如果启用，新出现的实体或方块将添加到该配置的默认值。
auto-populate=false
# Default max collisions used for all entities/blocks unless overridden.
# 生物或方块的默认碰撞盒（被特殊指定的生物或方块除外）。
defaults {
blocks=8
entities=8
}
# Max amount of entities any given entity or block can collide with. This improves performance when there are more than 8 entities on top of eachother such as a 1x1 spawn pen. Set to 0 to disable.
# 一个实体或方块可以发生碰撞的数量上限。可以将其设为0以禁用。
max-entities-within-aabb=8
# Per-mod overrides. Refer to the minecraft default mod for example.
# 和具体模组有关，比如表示 Minecraft 游戏本体的默认模组。
mods {
botania {
blocks {}
# Default max collisions used for all entities/blocks unless overridden.
defaults {}
# Set to false if you want mod to ignore entity collision rules.
enabled=true
entities {
botaniaspark=-1
}
}
minecraft {
blocks {
"detector_rail"=1
#一个探测铁轨的最大碰撞个数。
"heavy_weighted_pressure_plate"=150
#一个金质测重压力板的最大碰撞个数。
"light_weighted_pressure_plate"=15
#一个铁质测重压力板的最大碰撞个数。
"mob_spawner"=-1
#一个刷怪箱的最大碰撞个数。
"stone_pressure_plate"=1
#一个石质压力板的最大碰撞个数。
"wooden_button"=1
#一个木质按钮的最大碰撞个数。
"wooden_pressure_plate"=1
#一个木质压力板的最大碰撞个数。
}
# Default max collisions used for all entities/blocks unless overridden.
# 生物或方块的默认碰撞盒（被特殊指定的生物或方块除外）。
defaults {}
# Set to false if you want mod to ignore entity collision rules.
# 设置为 false 可以使模组忽略实体碰撞的限制。
enabled=true
entities {
thrownpotion=-1
#一个扔出去的药水的最大碰撞个数。
}
}
}
}
exploits {
#漏洞
prevent-creative-itemstack-name-exploit=true
#阻止客户端发送名称长度超过字符串的最大限制的物品数据包。
prevent-sign-command-exploit=true
#阻止客户端发送没有相应权限的玩家创建包含命令的内容的牌子数据包。
}
general {
#常规设置
# The directory for Sponge plugin configurations, relative to the
# execution root or specified as an absolute path.
# Note that the default: "${CANONICAL_GAME_DIR}/config"
# is going to use the "plugins" directory in the root game directory.
# If you wish for plugin configs to reside within a child of the configuration
# directory, change the value to, for example, "${CANONICAL_CONFIG_DIR}/sponge/plugins".
# Note: It is not recommended to set this to "${CANONICAL_CONFIG_DIR}/sponge", as there is
# a possibility that plugin configurations can conflict the Sponge core configurations.
config-dir="${CANONICAL_GAME_DIR}/config"
# Disable warning messages to server admins
# 禁用传送警告消息到服务器管理员处。
disable-warnings=false
# Additional directory to search for plugins, relative to the
# execution root or specified as an absolute path.
# Note that the default: "${CANONICAL_MODS_DIR}/plugins"
# is going to search for a plugins folder in the mods directory.
# If you wish for the plugins folder to reside in the root game
# directory, change the value to "${CANONICAL_GAME_DIR}/plugins".
# 指定一个包含有插件的额外目录。
plugins-dir="${CANONICAL_MODS_DIR}/plugins"
}
ip-sets {}
logging {
#日志记录选项
# Log when blocks are broken
# 当一个方块被打破时记录。
block-break=false
# Log when blocks are modified
# 当方块被改变时记录。
block-modify=false
# Log when blocks are placed
# 当方块被放置时记录。
block-place=false
# Log when blocks are populated in a chunk
# 当方块在区块中填充时记录。
block-populate=false
# Log when blocks are placed by players and tracked
# 当方块被玩家放置和跟踪时记录。
block-tracking=false
# Log when chunks are queued to be unloaded by the chunk garbage collector.
# 当区块被设置为等待卸载时记录。
chunk-gc-queue-unload=false
# Log when chunks are loaded
# 当区块加载时记录。
chunk-load=false
# Log when chunks are unloaded
# 当区块卸载时记录。
chunk-unload=false
# Whether to log entity collision/count checks
# 是否记录对于实体碰撞或计数的检查。
entity-collision-checks=false
# Log when living entities are destroyed
# 当生物实体被破坏（死亡）时记录。
entity-death=false
# Log when living entities are despawned
# 当生物实体消失（Despawn）时记录。
entity-despawn=false
# Log when living entities are spawned
# 当生物实体在世界上生成（Spawn）时记录。
entity-spawn=false
# Whether to log entity removals due to speed
# 是否记录由于实体移速过快而导致的移除。
entity-speed-removal=false
# Log when server receives exploited packet with itemstack name exceeding string limit.
# 记录对客户端发送名称长度超过字符串的最大限制的物品数据包的阻止行为。
exploit-itemstack-name-overflow=false
# Log when player attempts to respawn invisible to surrounding players.
# 记录玩家试图重生时对其他玩家不可见的行为。
exploit-respawn-invisibility=false
# Log when server receives exploited packet to update a sign containing commands from player with no permission.
# 记录对客户端发送没有相应权限的玩家创建包含命令的内容的牌子数据包的阻止行为。
exploit-sign-command-updates=false
# Add stack traces to dev logging
# 将堆栈跟踪（Stacktrace）添加到 dev 日志记录中。
log-stacktraces=false
# Log when a world auto-saves its chunk data. Note: This may be spammy depending on the auto-save-interval configured for world.
# 如果设置为 true，世界自动保存时将在日志文件记录区块数据。
world-auto-save=false
}
modules {
#模块
block-capturing-control=true
bungeecord=false
#启用 bungeecord 支持
entity-activation-range=true
#启用实体激活范围设置
entity-collisions=true
#启用实体碰撞设定
exploits=true
#启用防漏洞模块
game-fixes=false
#启用游戏修复模块
optimizations=true
#启用优化模块
# Use real (wall) time instead of ticks as much as possible
realtime=false
#使用真实的时间取代 ticks
# Controls block range and tick rate of tileentities.
# Use with caution as this can break intended functionality.
tileentity-activation=false
timings=true
#启用定时设置
tracking=true
#启用跟踪模块
}
optimizations {
#优化，详见https://docs.spongepowered.org/master/zh-CN/server/management/performance-tweaks.html
# Caches tameable entities owners to avoid constant lookups against data watchers. If mods cause issue, disable.
cache-tameable-owners=true
# Caches chunks internally for faster returns when querying at various positions
chunk-map-caching=true
# If enabled, block item drops are pre-processed to avoid
# having to spawn extra entities that will be merged post spawning.
# Usually, Sponge is smart enough to determine when to attempt an item pre-merge
# and when not to, however, in certain cases, some mods rely on items not being
# pre-merged and actually spawned, in which case, the items will flow right through
# without being merged.
drops-pre-merge=true
# This prevents chunks being loaded for getting light values at specific block positions. May have side effects.
ignore-unloaded-chunks-on-get-light=true
# Inlines a simple check for whether a BlockPosition is valid
# in a world. By patching the check, the JVM can optimize the
# method further while reducing the number of operations performed
# for such a simple check. This may however break mods that alter
# world heights and can thus be disabled in those cases.
inline-block-position-checks=true
# Handles structures that are saved to disk. Certain structures can take up large amounts
# of disk space for very large maps and the data for these structures is only needed while the world
# around them is generating. Disabling saving of these structures can save disk space and time during
# saves if your world is already fully generated.
# Warning: disabling structure saving will break the vanilla locate command.
structure-saving {
# If enabled, newly discovered structures will be added to this config with a default value.
auto-populate=false
enabled=false
# Per-mod overrides. Refer to the minecraft default mod for example.
mods {
minecraft {
# Set to false if you want mod to never save structures.
enabled=true
structures {
mineshaft=false
}
}
}
}
}
# Configuration options related to the Sql service, including connection aliases etc
sql {
# Aliases for SQL connections, in the format jdbc:protocol://[username[:password]@]host/database
# SQL 连接的别名
aliases {}
}
tileentity-activation {
# If enabled, newly discovered tileentities will be added to this config with default settings.
auto-populate=false
# Default activation block range used for all tileentities unless overidden.
default-block-range=64
# Default tick rate used for all tileentities unless overidden.
default-tick-rate=1
# Per-mod overrides. Refer to the minecraft default mod for example.
mods {}
}
timings {
#计时
enabled=true
#是否启用了计时
hidden-config-entries=[
#隐藏的配置条目
"sponge.sql"
]
history-interval=300
#计时报告的生成周期
history-length=3600
#为服务器保留多长时间（以 tick 为单位）的计时历史
server-name-privacy=false
#是否在报告里包括服务器名称、motd、online-mode、和服务器图标等资料
verbose=true
#计时报告的监测记录是否为详细模式
}
world {
# The auto-save tick interval used when saving global player data. (Default: 900)
# Note: 20 ticks is equivalent to 1 second. Set to 0 to disable.
# 自动保存全局玩家数据的间隔（以 tick 为单位）
auto-player-save-interval=900
# The auto-save tick interval used to save all loaded chunks in a world.
# Set to 0 to disable. (Default: 900)
# Note: 20 ticks is equivalent to 1 second.
# 自动保存世界中所有已加载的区块的间隔（以 tick 为单位）
auto-save-interval=900
# The number of newly loaded chunks before triggering a forced cleanup.
# Note: When triggered, the loaded chunk threshold will reset and start incrementing.
# Disabled by default.
# 触发强制清理前的新加载区块数目
chunk-gc-load-threshold=0
# The tick interval used to cleanup all inactive chunks that have leaked in a world.
# Set to 0 to disable which restores vanilla handling. (Default: 600)
# 自动清理世界中所有不活跃的区块的间隔（以 tick 为单位）
chunk-gc-tick-interval=600
# The number of seconds to delay a chunk unload once marked inactive. (Default: 15)
# Note: This gets reset if the chunk becomes active again.
# 标记为不活跃的区块还能存活多久（以秒为单位）
chunk-unload-delay=15
# If enabled, any request for a chunk not currently loaded will be denied (exceptions apply for things like world gen and player movement).
# Note: As this is an experimental setting for performance gain, if you encounter any issues then we recommend disabling it.
# 启用后，任何在当前未加载的区块的请求将被拒绝
deny-chunk-requests=true
# Lava behaves like vanilla water when source block is removed
# 当设置为 true 时，岩浆的行为将表现得像没有水源的原版水一样
flowing-lava-decay=false
# The amount of GameProfile requests to make against Mojang's session server. (Default: 1)
# Note: Mojang accepts a maximum of 600 requests every 10 minutes from a single IP address.
# If you are running multiple servers behind the same IP, it is recommended to raise the 'gameprofile-task-interval' setting
# in order to compensate for the amount requests being sent.
# Finally, if set to 0 or less, the default batch size will be used.
# For more information visit http://wiki.vg/Mojang_API
# 允许的对 Mojang 服务器发起的 GameProfile 请求数
gameprofile-lookup-batch-size=1
# The interval, in seconds, used by the GameProfileQueryTask to process queued gameprofile requests. (Default: 4)
# Note: This setting should be raised if you experience the following error:
# "The client has sent too many requests within a certain amount of time".
# Finally, if set to 0 or less, the default interval will be used.
# 两次请求 GameProfile 的时间间隔
gameprofile-lookup-task-interval=4
# Enable if you want the world to generate spawn the moment its loaded.
# 该世界是否应该在世界加载时生成
generate-spawn-on-load=true
# Vanilla water source behavior - is infinite
# False = 默认原版水源行为（译者注：无限水源）
infinite-water-source=false
# The list of uuid's that should never perform a lookup against Mojang's session server.
# Note: If you are using SpongeForge, make sure to enter any mod fake player's UUID to this list.
# 不应向 Mojang 服务器发起查询 GameProfile 请求的 UUID 列表
invalid-lookup-uuids=[
"00000000-0000-0000-0000-000000000000",
"0d0c4ca0-4ff1-11e4-916c-0800200c9a66",
"41c82c87-7afb-4024-ba57-13d2c99cae77"
]
# The defined merge radius for Item entities such that when two items are
# within the defined radius of each other, they will attempt to merge. Usually,
# the default radius is set to 0.5 in Vanilla, however, for performance reasons
# 2.5 is generally acceptable.
# Note: Increasing the radius higher will likely cause performance degradation
# with larger amount of items as they attempt to merge and search nearby
# areas for more items. Setting to a negative value is not supported!
# 物品实体的合并半径（译者注：掉落的物品能在多远的距离互相合并）
item-merge-radius=2.5
# Enable if this world's spawn should remain loaded with no players.
# 出生点区块是否应在不存在玩家时强制加载
keep-spawn-loaded=true
# Enable to allow natural leaf decay.
# 启用后，允许树叶自然枯萎
leaf-decay=true
# Enable if this world should be loaded on startup.
# 世界是否应在启动时加载
load-on-startup=true
# The maximum number of queued unloaded chunks that will be unloaded in a single tick.
# Note: With the chunk gc enabled, this setting only applies to the ticks
# where the gc runs (controlled by 'chunk-gc-tick-interval')
# Note: If the max unloads is too low, too many chunks may remain
# loaded on the world and increases the chance for a drop in tps. (Default: 100)
# 卸载区块，可降低tps
max-chunk-unloads-per-tick=100
# Specifies the radius (in chunks) of where creatures will spawn.
# This value is capped to the current view distance setting in server.properties
# 指定生成生物的半径(区块)
# 此数值受server.properties中的当前视野范围限制
mob-spawn-range=4
# A list of all detected portal agents used in this world.
# In order to override, change the target world name to any other valid world.
# Note: If world is not found, it will fallback to default.
# 一个在这个世界上的所有用于传送门代理的传送门列表
# 如果想要覆盖它，请把目标世界名称换成任何其他的可用的世界
# 如果设置的目标世界不存在，配置将仍使用默认值
portal-agents {
"minecraft:default_nether"=DIM-1
#默认地狱
"minecraft:default_the_end"=DIM1
#默认末地
}
# Enable if this world allows PVP combat.
# 是否允许世界中的 PVP 战斗
pvp-enabled=true
# Enable to allow the natural formation of ice and snow in supported biomes.
# 启用以允许自然生成雪方块与冰方块
weather-ice-and-snow=true
# Enable to initiate thunderstorms in supported biomes.
# 启用以启动雷暴
weather-thunder=true
# Enable if this world should be registered.
# 启用如果该世界应被注册
world-enabled=true
}
}

复制代码

如果你喜欢折腾，可以点开下面的链接

https://docs.spongepowered.org/master/zh-CN/server/

当你都设置好后，就可以开始配置插件了

服务器标题

清理插件

权限插件

基础插件

楼主并没用esscmds，而是Nucleus

此插件需要的部分楼主都汉化了

配置文件在\config\nucleus文件夹内

motd.txt是玩家进服后显示的欢迎语

mixins.conf是附属功能的开关

messages.conf则是插件在游戏中显示的语言

main.conf就是插件的设置了

commands.conf是各指令的附加条件

command-help-messages.conf则是帮助菜单的语言

楼主并没将message全部汉化，而是汉化了玩家主要用的指令

可自行汉化，下方为main.conf的注释

（请勿直接复制粘贴！插件不认中文注释）

#由Sponge专组汉化
#汉化：星光灬羽神、酷车手BB弹
#未经允许严禁搬运！
admin {
# 这个是当你发送公告的时候，公告的前缀[perfix]和后缀[suffix]的设置，玩家收到消息的时候可以用 {{displayname}}, {{name}}, 等代替它们的名字
broadcast-message-template {
prefix="&a[Broadcast]"
suffix=""
}
# 如果设置为true，改变游戏模式[gamemode]时就要一个额外的权限[除了允许使用/gamemode]外，还需要nucleus.gamemode.modes.<gamemode>权限
separate-gamemode-permissions=false
}
afk {
# 如果设置为true，则服务器会将所有判断为离开的人显示离开，就算它隐身了. 如果设置为fatle，则只有没有隐身的玩家才能使用afk
afk-when-vanished=false
# 玩家需要经过下面设置的时间后会自动进入离开状态[单位为秒]. 设置为0则禁用此功能，给予权限 "nucleus.afk.exempt.toggle"可以无视此功能
afktime=300
# 当玩家进入离开状态多少秒后，服务器会踢出玩家[单位为秒]. 设置为0则禁用此功能, 给予权限 "nucleus.afk.exempt.kick"可以无视此功能.
afktimetokick=0
# 如果设置为true，当玩家使用任何命令或其它行动[移动，打开东西，放置方块等]时，离开模式会自动解除
alert-on-command-send=true
# 如果设置为true，玩家离开会用公告显示, 给予权限可以无视此功能 nucleus.afk.notify permissions
broadcast-to-all-on-kick=true
# 如果有信息要发送，会进行广播，如果全部为空，则不会进行广播
messages {
# 当玩家进入离开模式时的提示
kick-message-to-player="你因离开太久而被服务器踢出了"
on-afk="&7*&f{{displayname}} &7暂时离开了"
on-command="&f{{displayname}} &7目前暂时不会做出反应."
# 如果为空，消息将不会进行发出.
on-kick="&f{{displayname}} &7因离开太久而被踢出服务器了."
on-return="&7*&f{{displayname}} &7退出了离开模式."
}
}
back {
# 会记录玩家的死亡坐标[设置为false则使用back时无法返回出生点]
on-death=true
# 会记录玩家进入传送门前的坐标[设置为false则使用back时无法返回进入传送门前的位置]
on-portal=false
# 会记录玩家使用传送前的坐标[设置为false则使用back时无法返回使用指令传送前的位置]
on-teleport=true
}
ban {
# 使用BAN的时候玩家最长的禁用时间，设置为-1则禁用此功能
maximum-tempban-length=604800
}
blacklist {
# 这是一个全服的黑名单, 如果设置为false, 相关的监听器将会关闭[就是相关的功能都没法用了]
blocked-actions {
# 如果设置为true,列入黑名单的人无法与任何东西进行互动，破坏以及放置。
environment=true
# 如果设置为true,列入黑名单的人像普通玩家一样存在，不能丢弃和拾起东西
possession=true
# 如果设置为true,列入黑名单的人将无法使用和互动
use=true
}
# 如果use-replacement设置为true,下面的物品将会代替一个玩家名字
replacement="minecraft:dirt"
# 如果设置为true,玩家列表[tab/list]将会从replacement里的物品代替名字
use-replacement=false
}
chat {
# 当输入"/me"指令时发言的前缀
me-prefix="&7* {{displayName}} "
# 如果设置为true，就可以修改聊天设置[这一项开启了下面的才可以使用]
modify-chat=true
# 如果设置为true，插件将会直接转换到插件的设置，但是这可能会覆盖其它插件的使用效果，你可以关闭这个来防止这样的问题发生，但是同时这里的设置也会失效
modify-main-message=true
# 如果设置为true，前缀会使用其它插件的聊天设置，如果设置为false，则本插件会覆盖它们
overwrite-early-prefixes=false
# 如果设置为true，后缀会使用其它插件的聊天设置，如果设置为false，则本插件会覆盖它们
overwrite-early-suffixes=false
templates {
# 默认的聊天格式，为空则禁用此功能
default {
# 如果设置为 "chatcolour" 时，则聊天时可以用彩色代码. 如果是 "namecolour" 则会全部都发出来[就是说你的&a是直接显示出来，而不是变成绿色]
default-chatcolour=""
# 如果玩家没有chatstyle权限，就会用默认组的聊天风格
default-chatstyle=""
# 如果玩家没有namecolour权限就会用默认颜色标注名字
default-namecolour="&e"
# 设置前缀聊天信息. {{prefix}} - 前缀 , {{suffix}} - 后缀 , {{name}} - 真正的名字, {{displayname}} - 当前名字
prefix="{{prefix}}&6[&e{{displayname}}&6]&d>> &r"
# 设置后缀聊天信息. {{prefix}} - 前缀 , {{suffix}} - 后缀 , {{name}} - 真正的名字, {{displayname}} - 当前名字
suffix=" {{suffix}}"
}
# 权限组会覆盖默认的聊天模板，但是注意区分组名的大小写
# 权限组覆盖问题：当玩家有多个权限组的时候，并且它们都有专属的聊天模板，插件会按照设置的权重进行判断该用哪个聊天方式
group-templates {
DefaultTemplate {
# 如果设置为 "chatcolour" 时，则聊天时可以用彩色代码. 如果是 "namecolour" 则会全部都发出来[就是说你的&a是直接显示出来，而不是变成绿色]
default-chatcolour=""
# 如果玩家没有chatstyle权限，就会用默认组的聊天风格
default-chatstyle=""
# 如果玩家没有namecolour权限就会用默认颜色标注名字
default-namecolour=""
# 设置前缀聊天信息. {{prefix}} - 前缀 , {{suffix}} - 后缀 , {{name}} - 真正的名字, {{displayname}} - 当前名字
prefix="{{prefix}} {{displayname}}&f: "
# 设置后缀聊天信息. {{prefix}} - 前缀 , {{suffix}} - 后缀 , {{name}} - 真正的名字, {{displayname}} - 当前名字
suffix=" {{suffix}}"
# 权重，当玩家有多个权限组的时候，weight数字越大，就会更优先选择，比如2大于1，权重为2的聊天模板为玩家所用，1的将不会使用
weight=1
}
}
}
# 如果“true”，当玩家发送一段消息时，Nucleus就会选择最适合的模板
# 默认模组永远有效，因为玩家的组里不是没有在权限插件里恢复，因此会提高性能
# 当聊天性能开始降低时停用这个选项，通常是因为权限插件使用不当
use-group-templates=true
}
command-logger {
# 用一个逗号[,]分隔开指令黑名单或白名单(详见下面设置)，
command-filter=[]
# 如果选项为true，则会直接找到真实命令[比如/wb快捷工作台会直接变成/workbench加入名单]
log-command-source {
command-block=true
console=true
other-source=true
player=true
}
# 如果设置为true,则会将这些命令记录到logs/插件内/指令等地方
log-to-file=false
# 如果设置为true,则"command-filter"则会记录白名单，不在记录内的都为黑名单[这会表面如果上面没有写有的指令，都无法使用]
whitelist=false
}
command-spy {
# 显示玩家使用指令时候的前缀
prefix="&7[CS: {{name}}]: "
# 如果设置为true, 就只会显示你有权限的指令，如果设置为false，则会显示出所有的指令
use-whitelist=true
whitelisted-commands-to-spy-on=[]
}
connection {
# The maximum number of reserved slots that can be used. Set to -1 for unlimited.
reserved-slots=-1
}
connection-messages {
# 如果设置为true, 和有 "nucleus.connectionmessages.disable" 权限的人都不会显示登录/退出信息.
disable-with-permission=false
# 你可以使用MC的颜色代码, 使用 "&"为颜色代码. 使用 "{{name}}" 来代替掉玩家的名字
first-login-message="&d欢迎 &f{{name}} &d来到服务器!"
# 你可以使用MC的颜色代码, 使用 "&"为颜色代码. 使用 "{{name}}" 来代替掉玩家的名字
login-message="&8[&a+&8] &f{{name}}"
# 你可以使用MC的颜色代码, 使用 "&"为颜色代码. 使用 "{{name}}" 来代替掉玩家的名字
logout-message="&8[&c-&8] &f{{name}}"
# 如果设置为true,则会更改每次的登录信息
modify-login-message=false
# 如果设置为true,则会更改每次的登出信息
modify-logout-message=false
# 如果设置为true,第一次登录时会显示登录信息
show-first-login-message=true
}
core {
# 当玩家点击另一个玩家名的时候，会显示出可以用短信私聊的指令，你可以修改这里来进行修改提示. 使用 {{player}} 会代替玩家名字.
command-on-name-click="/msg {{player}}"
# 如果设置为true，则会有大量命令显示在控制台里(debug调试模式)
debug-mode=false
kick-on-stop {
# 如果设置为true, 在服务器关服之前，插件会踢出所有玩家
enabled=false
# 这是设置关服的信息. 使用指令 /stop [信息] 可以自定义关服信息
message="服务器关闭"
}
# These parameters define how far out to check from a specific point when performing a warp. Larger numbers mean that a wider area is checked, but large numbers will cause server lag. The defaults are sufficient in most cases.
safe-teleport-check {
height=3
width=9
}
# 如果设置为true, 会生成一个 "messages.conf" 文件来修改插件显示信息
use-custom-message-file=true
# 如果设置为true, cancel a user's warmup on...
warmup-canceling {
# 运行一个指令
cancel-on-command=true
# movement
cancel-on-move=true
}
}
fly {
# 如果设置为true, 当玩家没有开启飞行，但是落点在空中的时候，使用/rtp[随机传送]的时候会将玩家传送至安全的地方
find-safe-location-on-login=true
# 如果设置为true, 可以保存玩家的飞行状态[下线再上线还会纯在飞行]，但必须有飞行权限，如果设置为false, 当登录在空中的时候，会选择一个安全的地方
require-fly-permission-on-login=false
# 如果设置为true, 就会记录玩家退出游戏后的飞行状态，If false, this information is only retained between player disconnects if was [/fly] used.
save-all-flystate-on-quit=true
}
home {
# 如果设置为true, 玩家会在复活时重生在家里，家的名字必须为[home]才可以复活
respawn-at-home=false
# 如果设置为true, Nucleus will attempt to ensure that users do not get warped into an unsafe situation (for example, if someone breaks blocks around a home).
use-safe-warp=true
}
info {
info {
# 如果 "use-default-info-section" 设置为true, 当玩家使用指令 "/info"时, 不会只显示部分信息
default-info-section=info
# 如果设置为true, 当玩家使用 "/info"指令时, 则会使用 "default-info-section" 的设置, 也就是说，使用 /info 指令将会等同于 /info <default-section>指令
# The list of sections can still be viewed by running "/info -l", if the user has the "nucleus.info.list" permission. If false, or the section does not exist, this list is shown, regardless of this permission.
use-default-info-section=false
}
motd {
# 等待到时间[以秒为单位]后就会给玩家发送一个MOTD信息
motd-login-delay=0.5
# 这个标题会在每个信息顶部都会显示，支持颜色代码，如果为空，则隐藏此标题
motd-title="&6MOTD"
# 如果设置为true, 登录时会生成文件 "motd.txt" ，你可以进行修改登录时显示的信息
show-motd-on-join=true
# 如果设置为false, 则会禁用分页模式[可以直接点上一页，下一页，不会全部一次显示出来]. 如果你只有一个界面, 不想要标题和 << >> 这个两个按钮, 否则建议你开启此选项
use-pagination=true
}
}
item {
skull {
# 如果设置为true, Nucleus will simply treat /skull as an alias to "/give [player] skull [number] 3 {SkullOwner:[skullplayer]}"
use-minecraft-command=false
}
}
jail {
# 允许玩家在监狱里输入的指令
allowed-commands=[
m,
msg,
r,
mail,
rules,
info
]
# 如果设置为true, 玩家在监狱的时候则无法发言
mute-when-jailed=false
}
jump {
# The maximum distance a player can move using the /jump command. Negative values mean infinite - use with care.
max-jump-distance=350
# The maximum distance a player can move using the /thru command. Negative values mean infinite - use with care.
max-thru-distance=25
}
kit {
# 如果设置为true, 当礼包已经满背包的时候，则会将剩下的东西扔在附近的地上
drop-items-if-inventory-full=false
# 如果设置为true, "drop-items-if-inventory-full" 将会失效, and the kit will only be consumed if everything can be consumed.
must-get-all-items=false
# 如果设置为true, 每个礼包都会有自己的权限 - nucleus.kits.<name>.
separate-permissions=false
}
message {
# The prefix to any message received via /helpop.
helpop-prefix="&7HelpOp: {{name}} &7> &r"
# The prefix for received messages. This is displayed to the receiever. Use {{from}} and {{to}} for the message sender/receiver, {{fromDisplay}} or {{toDisplay}} for the display names.
msg-receiver-prefix="&7[{{fromDisplay}}&7 -> me]: &r"
# The prefix for sent messages. This is displayed to the sender. Use {{from}} and {{to}} for the message sender/receiver, {{fromDisplay}} or {{toDisplay}} for the display names.
msg-sender-prefix="&7[me -> {{toDisplay}}&7]: &r"
socialspy {
# The tag to show at the beginning of a Social Spy message when a player is muted (or otherwise has the message cancelled).
cancelled-messages-tag="&c[cancelled] "
# The prefix for messages sent to social spies. Use {{from}} and {{to}} for the message sender/receiver, {{fromDisplay}} or {{toDisplay}} for the display names.
msg-prefix="&7[SocialSpy] [{{fromDisplay}}&7 -> {{toDisplay}}&7]: &r"
# 如果设置为true, and "use-levels" is true, players with social spy will also see messages from players at their own level.
same-levels-can-see-each-other=true
# The servers social spy level.
server-level=2147483647
# 如果设置为true, show messages that players try to send and are cancelled (usually due to being muted).
show-cancelled-messages=false
# 如果设置为true, only messages sent by players will be visible via Social Spy.
show-only-players=false
# 如果设置为true, Nucleus will check the "nucleus.socialspy.level" option on the subject for an integer level. A level can see their messages from and to players with levels below their own,
# unless "same-levels-can-see-each-other" is set to true, in which case, social spies can see messages from their own level. Players have a default level of 0.
use-levels=false
}
}
misc {
# Sets the maximum speed that a player can set via the /speed command.
max-speed=5
# 如果设置为true, in order to keep invulnerability on login, the permission for the god command (nucleus.god.base) is required. If false, a player without access to the /god will not be invulnerable on login.
require-god-permission-on-login=false
}
mob {
# The maximum number of mobs that can be spawned using /spawnmob.
max-mobs-to-spawn=20
# Controls the mobs that cannot be spawned. Each section is world specific, with the key being the world name in question, which is case sensitive.
spawning-blocks {
DIM-1 {
# The full IDs of the mobs to block. Minecraft mobs have an id starting with "minecraft:"
block-mobs-with-ids=[]
# 如果设置为true, all vanilla mobs will be blocked in this world.
block-vanilla-mobs=false
}
DIM1 {
# The full IDs of the mobs to block. Minecraft mobs have an id starting with "minecraft:"
block-mobs-with-ids=[]
# 如果设置为true, all vanilla mobs will be blocked in this world.
block-vanilla-mobs=false
}
world {
# The full IDs of the mobs to block. Minecraft mobs have an id starting with "minecraft:"
block-mobs-with-ids=[]
# 如果设置为true, all vanilla mobs will be blocked in this world.
block-vanilla-mobs=false
}
}
}
# Available modules to enable or disable. Set each to ENABLED to enable the module, DISABLED to prevent the module from loading or FORCELOAD to load the module even if something else tries to disable it.
# 要启用的模块
modules {
admin=ENABLED
afk=ENABLED
back=ENABLED
ban=ENABLED
blacklist=ENABLED
chat=ENABLED
command-logger=ENABLED
command-spy=ENABLED
connection=ENABLED
connection-messages=ENABLED
environment=ENABLED
fly=ENABLED
freeze-player=ENABLED
fun=ENABLED
geo-ip=DISABLED
home=ENABLED
ignore=ENABLED
info=ENABLED
inventory=ENABLED
item=ENABLED
jail=ENABLED
jump=ENABLED
kick=ENABLED
kit=ENABLED
mail=ENABLED
message=ENABLED
misc=ENABLED
mob=ENABLED
mute=ENABLED
nameban=ENABLED
nickname=ENABLED
note=ENABLED
playerinfo=ENABLED
powertool=ENABLED
protection=ENABLED
rtp=ENABLED
rules=ENABLED
server-shop=ENABLED
sign=ENABLED
spawn=ENABLED
staff-chat=ENABLED
teleport=ENABLED
vanish=ENABLED
warn=ENABLED
warp=ENABLED
world=ENABLED
}
mute {
# 这是禁言的设置，会封掉所有聊天和使用聊天指令"/me"
blocked-commands=[
"minecraft:me",
say
]
# 禁言的最大时间. 设置为-1则禁用此功能
maximum-mute-length=604800
# The tag to prepend any cancelled/muted messages with.
muted-chat-tag="&c[cancelled] "
# 如果设置为true, those with the "nucleus.mute.seemutedchat" permission will see chat from those who are muted.
see-muted-chat=false
}
nameban {
default-reason="你的名字无法进入此服务器. 你可以修改你的名字来重新进入服务器."
}
nickname {
# 昵称的名字的最大字数
max-nickname-length=20
# 昵称的名字的最少字数
min-nickname-length=3
# 拥有昵称后，聊天时显示的昵称前缀
prefix="&b~"
}
note {
# 如果设置为true, 或者有 nucleus.note.showonlogin 权限的人都会在登录的时候显示MOTD信息. 如果设置为false，则什么都没有发生
show-login=true
}
playerinfo {
list {
# 如果启用了分权限组，则玩家不在任何权限组时显示的权限组名称
default-group-name=Default
# 如果设置为true，则会按照组去列出玩家
group-by-permission-groups=false
# Enable this if you are using Multicraft. This will run /minecraft:list when /list is run on the console.
multicraft-compatibility=false
}
seen {
# 如果设置为true, the permission "nucleus.seen.extended" is required for all information that comes from modules. If false, information will be displayed based on the command permissions a player has (so, a player with check ban rights can see banning information).
require-extended-permission-for-module-info=false
}
}
protection {
# 禁止践踏作物
disable-crop-trample {
mobs=false
players=false
}
mob-griefing {
# 如果设置为true, mob griefing will be disabled except for the entities listed in the whitelist (which should be done by mob ID).
enable-protection=false
whitelist=[]
}
}
rtp {
# 使用rtp时会先找到一个安全位置的次数[就是会随机选择X个点，然后检测安不安全]，设置太低，则可能会导致多次失败
attempts=10
# 最大可以传送到的 Y 坐标
maximum-y=100
# 最小可以传送到的 Y 坐标
minimum-y=0
# 传送半径为中心到设置的边界的地方，但是这不会改变原有的世界边界
radius=30000
# 如果设置为true，则用rtp会传送到表面，而不会进入洞穴里
surface-only=false
}
rules {
# The server rules, displayed when /rules is run. Supports Minecraft colour codes, prefixed with ampersands (&).
rules=[
"Be respectful.",
"Be ethical.",
"Use common sense."
]
}
server-shop {
# The maximum amount a player can buy in one transaction.
# 玩家在交易中一次可以购买的最大数量.[系统商店/sell]
max-purchasable-at-once=64
}
spawn {
# 这个设置会让重生/指令和每个世界或者整个服务器的默认传送点进行修改[默认出生点选择方法:站在你想要的位置，输入/setspawn]
global-spawn {
# 如果 "spawn-on-login" 设置为true, 当进行登录的时候，都会传送到 "target-spawn-world" 的设置
on-login=false
# 如果设置为true, 复活/死亡都会传送到 "target-spawn-world"的设置, 如果设置为false，则会在默认出生点复活
on-respawn=true
# 如果设置为true, 指令 /spawn 会让玩家传送到 "target-spawn-world" 的设置, 如果设置为false,则会在默认出生点复活.
on-spawn-command=true
# 服务器默认的世界，如果设置错误，则会使用默认选择[world]
target-spawn-world=world
}
# 如果设置为true, 玩家登陆将会传送到默认出生点, 可以使用权限 "nucleus.spawn.exempt.onjoin" 进行无视
spawn-on-login=false
# 如果设置为true, 使用 /spawn 指令的时候将会寻找一个安全的地方. 如果设置为false,则不会检测直接传送到那里
use-safe-spawn=false
}
staff-chat {
# 这个是颜色代码，是玩家聊天时显示的颜色[直接填写a-e 0-9]
message-colour=b
# OP的聊天模板. 你可以用这些代替部分信息: {{prefix}} - 前缀 , {{suffix}} - 后缀 , {{name}} - 真正的名字, {{displayname}} - 当前使用名字
message-template="&b[STAFF] &r{{displayname}}&b: "
}
teleport {
# 如果设置为true, by default, a target player will not be informed that they have been /teleport ed to. Override using "-q false"
default-quiet=true
# 如果设置为true, 传送时会传送到一个安全的地方
use-safe-teleportation=true
}
warn {
# The command to execute when a player has a specific number of warnings.
action-command="tempban {{name}} 1d Exceeding the active warning threshold"
# The default length a warning is set to if no length is provided (in seconds). Set to -1 for no maximum.
default-length=-1
# 如果设置为true, a record of players warnings will be kept as 'expired warnings'. If false, they will not.
expire-warnings=true
# The maximum length a warning may last for (in seconds). Set to -1 for no maximum.
maximum-warn-length=-1
# The minimum length a warning will last before expiring (in seconds). Set to -1 for no minimum.
minimum-warn-length=-1
# 如果设置为true, players will be shown all their warnings when they login. If false, they will not.
show-login=true
# The number of active warnings a player must accumulate before the action command is executed. Set to -1 to disable.
warnings-before-action=-1
}
warp {
default-category-name=Uncategorised
# 关于玩家warp传送使用金钱的设置. 创建指令 /warp setcost <warp名字> <金钱>。下面为默认设置
default-warp-cost=0
# 如果设置为true, warp将会显示出已有的坐标，可用 /warp list查看
list-warps-by-category=false
# 如果设置为true, 则会每个传送点都有自己的权限，权限为： - nucleus.warps.<name>.
separate-permissions=false
# 如果设置为true, warp指令会让一个玩家传送到安全的位置，如果设置为false，则会不检测安不安全直接传送过去
use-safe-warp=true
}
world {
# 世界边界，如果其他的世界使用 "/world create"指令 (或 "/nworld create"指令) 生成的，会自动有设置的数字为直径的边界，设置为0或者负数则为禁用
default-world-border-diameter=0
}

复制代码

未经允许请勿做拿别人汉化的东西搬运到论坛这种不道德的行为！

等楼主都汉化好了会搬到论坛上的

该基础插件的使用指令和方法和我们所熟悉的ess几乎无差

让玩家像平常一样用指令就好了

大字标题

回复: